6 ft Pre-stained Cedar Dog Ear Privacy Fence with Cut In Gate on S 68th E Ave in Tulsa, OK

Name: Empire Fence Co. Tulsa
Price range: $$

Back to Map | 6-Foot | Wood Fence | Gate | Residential

Fence System Details

Includes details of a 6-Foot Wood Fence installation in Tulsa. This Residential fencing project built by Empire Fence Company may include other types of fences or fence materials as specified below.

Two heights went in on this Tulsa property: 63 feet of 6 foot cedar privacy fence and 24 feet at 8 foot, both in pre stained cedar tone pickets, plus a 4 foot walk gate cut into an existing fence section. Stepping up to 8 foot only where the sight line calls for it is the practical way to get privacy back without raising a whole perimeter. Every picket is cedar on square steel posts set in concrete, and the taller sections carry a fourth backrail so 8 foot boards stay flat under wind. Pre stained pickets bring their color from the first day. Targeted work like this fits an established yard better than a full replacement would.

Cedar Privacy Fence 6' (Pre-stained) Dog Ear on Steel Posts

The 6 foot run covers 63 feet in pre stained cedar tone, so the color is there the day we pull off the job. Square steel underneath keeps that line straight in clay that moves with every wet season.

5/8″ x 3.5″ x 6′ – Cedar Fence Pickets (Pre-Stained) 2 1/2″ Square Steel Fence Posts, Set in Concrete (3) Douglas Fir 2×4 Fence Backrails Galvanized Ring Shank Nails

Privacy Fence 8' Cedar Dog Ear on Steel Posts

Twenty four feet steps up to 8 foot where the extra height buys back privacy the 6 foot line could not reach. Taller pickets need more to hold them, so this section runs four Douglas fir backrails instead of three.

5/8″ x 3.5″ x 8′ Cedar Fence Pickets
2 1/2″ Square Steel Fence Posts, Set in Concrete
(4) Douglas Fir 2×4 Fence Backrails
Galvanized Ring Shank Nails

Cut-In Gate on Existing Dog Ear Privacy Fence

Rather than rebuild a section, we cut a 4 foot gate into the existing privacy fence and set an additional hinge side post 36 inches deep to carry the weight. The opening lands where you need it and the rest of the fence stays untouched.

New Gate Cut Into An Existing Fence Section
New Gate Hardware
Additional Hinge Side Post, Set 36″ Deep