5 ft Ameristar Iron Fence with Wood Privacy Fence on S Terwilleger Blvd in Tulsa, OK

Name: Empire Fence Co. Tulsa
Price range: $$

Back to Map | 5-Foot | Wood Fence | Metal Fence | Residential

Fence System Details

Includes details of a 5-Foot Metal Fence installation in Tulsa. This Residential fencing project built by Empire Fence Company may include other types of fences or fence materials as specified below.

Three fence styles meet on this Tulsa property. Ameristar Montage ornamental steel runs where the view matters and the yard should stay open, while cedar cap and trim privacy closes the sides facing neighbors, at 8 feet where the most cover was needed and 6 feet elsewhere. Stepping the heights keeps the tall wall where it earns its keep instead of ringing the whole lot. Cap and trim finishes the tops of the pickets and covers the joints, which sheds water off the end grain and keeps the top line crisp. Square steel posts set in concrete carry both cedar sections. Established Tulsa lots often mix open frontage with tight rear property lines, and a mixed system answers both.

Iron Ameristar Montage 5' Classic 3 Rail

Ameristar Montage Classic gives you a clean black steel line that keeps sight lines open across the property. We installed the panels on posts set in concrete, and the factory finish stands up to Oklahoma sun without repainting.

2″x 16 Gauge Black Fence Posts, Set in Concrete
4″ Standard Picket Airspace
Extended Picket Bottom Rail

Privacy Fence 8' Cedar Cap & Trim on Steel Posts

The 8 foot cedar sections handle the areas needing the most height and cover. Four backrails and a cap board across the top hold that extra height flat and keep water off the picket ends.

5/8″ x 3.5″ x 8′ Cedar Fence Pickets
2-1/2″ Square Steel Fence Posts, Set In Concrete
4 – Douglas Fir Back 2×4 Back Rails
2×6 Cedar Cap Board
1×4 Cedar Trim
Galvanized Ring Shank Nails

Privacy Fence 6' Cedar Cap & Trim on Steel Posts

Where 8 feet was more than the yard needed, we stepped down to 6 foot cedar with the same cap and trim detail so both heights read as one design. Steel posts carry it, and the trim board hides the joint between pickets and cap.

5/8″ x 3.5″ x 6′ Cedar Fence Pickets
2-1/2″ Square Steel Fence Posts, Set In Concrete
(3) Douglas Fir Back 2×4 Back Rails
2×6 Cedar Cap Board
1×4 Cedar Trim
Galvanized Ring Shank Nails